Install TWRP on Samsung Galaxy S10e Exynos SM-G970F Pie 9.0 using Magisk

Even if Samsung Galaxy S10e is an entry-level flagship phone in S10 series, It has Powerful Specs that can survive in the Android World for 4-5 Years. Yes, With 6-8 GB RAM and Flagship level processor, you can use this mobile without any Lag issues. Also, with Samsung One UI Pie 9.0 firmware, the software is well optimized. Compare with other Custom Skin OS; this OS is better with other Manufacturers. So, If you are a regular user, you don’t need root to squeeze performance from your mobile. If you are a developer and hate Custom Skin OS, you should check Custom ROM status. Most of the Un-Official ROMs contain bugs. If you are a root user, you should flash firmware using Flashify app or else you will lose root access. You are clear in your decision, follow the below steps to achieve root on your device.

Why should you Root Samsung Galaxy S10e?

You should have a strong reason for rooting. Samsung Already released One UI 9.0 Pie and is already optimized. You have More than Enough 6/8 GB RAM to use daily apps without Lag. You can use this device without lag for years until Samsung mess with some Bloatware. But beyond, this not go reasons, you are addicted to some root apps, or you are a frequent user of some Custom OS, you can proceed further. But if you want to root because everybody is doing, I advise you, don’t root If you didn’t have any experience. For regular users, It can become a Nightmare.

How to Install TWRP on Samsung Galaxy S10e Exynos SM-G970F Pie 9.0 using Magisk

First of all, thanks to topjohnwu – XDA Senior developer for finding this way and this genius is a one who discovered and maintaining Magisk. Additional to this we should thank XDA Developers- ianmacd and PiCkLeS for exploring the TWRP installing steps. Samsung Galaxy S10e Exynos International variants come with a flexible bootloader. This means that the smartphone can be easily rooted. Also, the device can accept to install TWRP recovery or any other custom recovery file/app alike. Don’t try with Snapdragon US Variants like Verizon devices. They come with locked Bootloader.

But In the below method, we are going to Root this device by using Magisk, and then we are going to install TWRP. Before this, In All Samsung devices, we Install TWRP first and Install Magisk Second hand. We are doing reverse here. You can install TWRP using the official App when it is released. TWRP recovery is a custom recovery file which must be installed on Samsung Galaxy devices because you can root them successfully. In this article, we explained the easiest method to follow and install TWRP recovery on Samsung Galaxy S10e. However, the tool required for rooting this device is the Magisk App.

With the help of TWRP Recovery, you can quickly flash the latest version of Magisk into your S10e to gain root access. Before sharing the tutorial, you may want to know that, with the TWRP recovery present on your device, you can easily install any custom ROM or firmware. Does it seem complicated? Relax, everything will be explained succinctly in bullets.

Things to check out for;

• Check your device model number.

• Install Latest Magisk Manager.

• Make sure your device battery is charged above 50%

• Backup your current files and data- Full Data Loss Process (save them on external storage).

• You cannot use Samsung Pay, Secured folder, and some official apps from Samsung.

• You can’t update your firmware, to get new firmware you have to follow the below steps with the latest firmware.

• Read full tutorial before the process.

Pre-Requirement Steps

• Enable USB Debugging Mode and OEM Unlock on your mobile. To do this; go to settings >>> about >>> Tap on the “Build Number” 7-10 times consistently to enable “Developer Options,” then go to the “Developer Options” and enable USB Debugging Mode and OEM Unlock. There is no complicated process in the Samsung Galaxy S10e Exynos.

• Download and install the Samsung USB driver to your computer system.

• Also, download the ODIN software. Select above Oreo version in the ODIN list. Install ODIN on your PC.

Part 1: Installing Magisk Manager

• First, you should Install Magisk Manager using the below steps. Don’t skip this step.

• Refer- Root Samsung Galaxy S10e Exynos using Magisk

Part 2: Installing TWRP with the help of Magisk Manager

• Download twrp-g970f-beyond0lte-3.3.1-4_ianmacd.img and copy it on your mobile.

• Open Installed Magisk and Select Install in Magisk, It will ask For zip file and Patch Boot Image File. Select the Boot Image file (TWRP Image file).

• Navigate to your downloaded TWRP and patch the TWRP.

• Wait for the process to complete, In the end, you will get magisk patched .tar file. The .tar file will be in the same folder where you have the Stock TWRP file.

• Copy magisk_patched.tar file to your PC.

Flash Patched TWRP using ODIN

• Should flash TWRP in the Same partition where you installed Patched Magisk.

• Switch off your Mobile. Enter into Download mode->Volume Down+ Bixby Buttons and Connect Your Mobile To PC via USB Cable, After Samsung Logo Appear, Release all keys.

• After entering into Download Mode, it will say Warning, Press Volume Up button to continue.

• Launch Odin Application.

• It Will Show the message added.

• If you did not get this message Repeat the above steps.

• After Getting Added Message Select, AP/PDA Button then Browse for the Firmware file selects it. Un-Tick the Auto-Reboot.

• Press Start wait for the tasks to complete. After the process complete, Press Volume Down+ Power button to exit Download mode. When the screen goes off, Immediately Press Volume Up + Bixby + Power buttons to boot into Recovery mode.

• After entering into TWRP recovery mode, Go to Wipe Data/Factory Reset and Select Yes to wipe data. It will erase your saved data in your device. Don’t Boot into OS, Read below Boot stages before booting.

Flash multidisabler using TWRP

• Go to Install. Install downloaded multidisabler.zip file using TWRP. Go to Wipe Data/Factory Reset and Select Yes to wipe data. It will erase your saved data in your device. Don’t Boot into OS, Read below Boot stages before booting.

Boot into Rooted and Non-Rooted OS

• Here is the beauty of the new method; you can Boot into both Rooted and Non-Rooted environments in the same mobile.

• Non-Rooted OS Boot– Press Power button. It will boot you to Normal OS. You have to set up your device like a new device.

• Boot into Rooted OS – Press and Hold Volume Up + Bixby + Power buttons, release all the keys once the Bootloader warning appears. You have to set up your device like a new device. You can select the root status using Root Checker.

• Stock Recovery Boot – Press and Hold Volume Up + Bixby + Power buttons, release Power + Bixby keys while you hold the Volume Up key.

Selva Ganesh

Selva Ganesh is the Chief Editor of this Blog. He is a Computer Science Engineer, An experienced Android Developer, Professional Blogger with 8+ years in the field. He completed courses about Google News Initiative. He runs Android Infotech which offers Problem Solving Articles around the globe.