Samsung Galaxy J1 Mini Prime comes with only 1 GB RAM. Also, It comes with a Quad-Core 1.2 GHz processor. You can’t use it even for a basic process like Calling, It will hang and lag If you suddenly receive a call, You can’t swipe call to Answer. If you rooted your device you can easily enhance your device and you can use it for 1-2 years. To perform rooting on your device, follow the below steps. You may not use the High version OS. But, you can use Lite Weight version devices.
Why should you Root Samsung Galaxy J1 Mini Prime?
You have only 1 GB of RAM. You can’t even make a call if you have a lot of Call Logs. If we optimize correctly with correct Custom OS after rooting, we can see a lot of Improvements. So, after rooting, I can expect Lag-free experience? Probably. Also if we hibernate and eliminate a lot of unwanted apps, and optimize some apps, your device is hardware limited. But, within these limits, we can enhance the performance by 10-30% compared with your old usage. If you use Lite weight Custom ROMs, you can expect a 40-50% improvement in performance based on what custom OS you are choosing.
How to Root Samsung Galaxy J1 Mini Prime ( SM-J106B / SM-J106F / SM-J106H / SM-J106M )
Samsung Galaxy J1 Mini Prime comes with a flexible bootloader other than Verizon devices. Verizon devices come with locked Bootloader. This means that different smartphone variants can be easily rooted. Also, the device can accept to install TWRP recovery or any other custom recovery file/app alike.
TWRP recovery is a custom recovery file that must be installed on Samsung Galaxy devices because you can root them successfully. In this article, we explained the easiest method to follow and install TWRP recovery on Samsung Galaxy J1 Mini Prime. However, the tool required for rooting this device is the Magisk App.
With the help of TWRP Recovery, you can quickly flash the latest version of Magisk into your Samsung Galaxy J1 Mini Prime to gain root access. Before sharing the tutorial, you may want to know that, with the TWRP recovery present on your device, you can easily install any custom ROM or firmware. Does it seem complicated? Relax, everything will be explained succinctly in bullets.
Things to check out for;
-
Check your device model number.
- Select TWRP Based on the mobile model number.
-
Make sure your device battery is charged above 50%
-
Backup your current files and data, just in case (save them on external storage).
Pre-Requirement Steps
-
Enable USB Debugging Mode and OEM Unlock on your mobile. To do this; go to settings >>> about >>> Tap on the “Build Number” 7-10 times consistently to enable “Developer Options,” then go to the “Developer Options” and enable USB Debugging Mode and OEM Unlock. There is no complicated process in the Samsung J1 Mini Prime.
-
Download and install the Samsung USB driver to your computer system.
-
Also, download the ODIN software. Select the above Oreo version in the ODIN list. Install ODIN in your PC.
- Download Magisk.Zip (Latest Version) and Copy it to Your Phone Memory.
-
Download and save the TWRP File. Please select the correct model number TWRP file.
Flash TWRP using ODIN
- Restart the device. Then, enter into Download mode. To do this; press and hold down the Volume Down + Home+ Power buttons at the same time for some time.
-
Press the Volume Up button to continue when you see the warning message.
-
Now, connect the Samsung Galaxy J1 mini prime mobile to the computer via USB cable.
-
Launch the Odin app on your computer. If the device is detected by this app (Odin), it will show you a message that reads – added!!!
However, if the device is not correctly connected to the PC, you won’t see this message. So, you have to check the USB cable if it is in good condition and reconnect the device.
-
After connecting the Samsung device, click on the PDA/PA button to browse/search and get the TWRP from where you saved it on your PC. Also, navigate to “options” and un-tick the Auto-Reboot.
-
Click on “Start”
-
Once the file is loaded into the device, reboot your device.
-
Kudos, you have just Installed the TWRP on your Samsung J1 mini prime. If you installed TWRP, Don’t turn on your mobile. Immediately, move to Magisk Installation steps.
Install Magisk in your Samsung Galaxy J1 mini prime using TWRP
- Boot it into recovery mode->Volume Up+ Home +Power Button.
- Now it Will Boot into TWRP Recovery Mode.
- Select Wipe->Advance Wipe->Select Cache Data.
- Return to Home of TWRP select Install.
- Select Magisk.Zip.
- After the Installation Reboot Your Mobile.
- You can also install Magisk Manager in your Mobile Applications. You can check the Root status, using Root Checker.
What More?
Samsung Galaxy J1 mini prime is a Mid-Range phone; Samsung Stopped updates from their side. But, If you use Lite weight Custom Roms, you can expect a considerable performance Improvement. So, If you have little knowledge of tech, I advise you to Root and uninstall some unwanted apps. You can also flash some Custom ROMs. If you flash Custom ROM, check what is working and what is not working. It is wise to use Some Official Custom ROMs like Lineage. If you accidentally bricked your mobile, during this process, flash Samsung Galaxy J1 mini prime Stock Firmware.
Selva Ganesh is the Chief Editor of this Blog. He is a Computer Science Engineer, An experienced Android Developer, Professional Blogger with 8+ years in the field. He completed courses about Google News Initiative. He runs Android Infotech which offers Problem Solving Articles around the globe.
Leave a Reply