Xiaomi Redmi 10A Modes, Reset and SAR Value

The latest Android mobiles Come with powerful specs. That can handle daily apps that are updated without issues. Since our smartphones have become advanced, troubleshooting methods have also become complicated. Most companies Remove already Removed all batteries in their mobile. So when you are mobile stuck or frozen, we must go into advanced troubleshooting methods that depend on software-related issues. Xiaomi Redmi 10A is an Entry-level mobile with 2/6GB RAM and a MediaTek MT6762G Helio G25 processor. When you have more than 3 GB of RAM, your mobile can handle any apps without issues. But you may face frequent daily problems with less than 3 GB of RAM. You are knowing basic troubleshooting methods when your mobile faces software-related issues are always wise. Here, we listed all Xiaomi Redmi 10A modes and respective keys. These modes are helpful when you want to troubleshoot on your mobile. We also listed the SAR value for your reference.

Xiaomi Redmi 10A Modes (dandelion)

When you stick with the regular usage of your Android mobiles, mobile manufacturers’ optimized UI and options are enough. But When you want to reach the limit of your Android mobile, You need to deal with the developer options and optimizations. To Perform Developer-related options like Firmware flash or Rooting, We have to put our mobiles in a specific mode. Based on the requirement, the models may vary. Booting into different ways needs different key combination presses or commands. The key combinations and ADB commands help us boot into specific modes and perform other actions. So, here we are listing how you can boot into different ways on your mobile.

Boot into Fastboot/Bootloader Mode

Fastboot mode is used to flash the files into your mobile. You can flash any firmware or root files on your mobile. Mainly in the Fastboot way, we use Xiaomi Flashtool or ADB Commands for flashing the file. You can also use this mode to unlock your Bootloader. 

• Switch off your Xiaomi Redmi 10A Mobile. Enter into Fastboot mode->Volume Down+Power Button and Connect Your Mobile To your PC via USB Cable; after Xiaomi Logo Appear, Release all keys.

Unlock Xiaomi Redmi 10A Gaming Bootloader using ADB and Fastboot

• Enable USB Debugging Mode and OEM Unlock on your mobile. To do this, go to settings >>> about >>> Tap on the “Build Number” 7-10 times consistently to enable “Developer Options,” then go to the “Developer Options” and enable USB Debugging Mode, OEM Unlock. There is no complicated process in Xiaomi Redmi 10A.

  Deal of the Day

  Anker 737 Power Bank Now Available for $74: Cyber Monday Deal

• Also, download the ADB drivers. Install it on your PC.

• Go to the official Mi Bootloader Unlock website and log in with your Mi Account.

• Enter your Mobile details like phone number, IMEI, and reason. You will get the confirmation code on your mobile. Enter the confirmation code on the Mi website and request for unlocking. You will receive a confirmation mail after the approval in 2-10 Days.

 

• Install the Mi Flash Tool in the received mail. Log in with your Same Mi Account, which is used to get the software.

• Switch off your device. Connect your mobile to the PC. Then, enter Fastboot mode. To do this, press and hold down the Volume Down + Power buttons simultaneously for some time. It will boot your mobile into Fastboot mode.

• After you successfully boot into Fastboot mode, Select Unlock. It will take 2-3 minutes to finish the process. After the successful process completion, Reboot your mobile.

• Check again to enable “Developer Options,” then go to the “Developer Options” and enable USB Debugging Mode, OEM Unlock. Sometimes they disabled themselves after the boot.

Flash Xiaomi Redmi 10A Firmware using Xiaomi Flash Tool

• Download the Xiaomi Flash tool.

• Extract the files from the Zip.

• After the extraction, Right-click on the “XiaoMiFlash” software on your PC and choose “Run as Administrator.”

• We use Administrator Because the USB driver should have General access to everywhere without folder restrictions. You may know these issues if you have already installed the ADB drivers.

• Navigate to “Driver” and Install all the necessary Driver files.

• Download the necessary firmware for your mobile and copy it to your PC.

• Switch off your device. Then, enter Fastboot mode. To do this, press and hold down the Volume Down + Power buttons simultaneously for some time.

• Press the Volume Up button to continue when you see the warning message.

• Connect the Xiaomi Redmi 10A mobile to the USB cable computer.
• Select “Refresh” in the app; you will get the device ID in the list.

• When you don’t get the device, Repeat the above steps.

• After getting your mobile ID, Choose firmware using the “select” tab.

• Choose “save user data” in the bottom dot options.

• Now select “Flash.” The software will flash the firmware to your mobile.

• You will get the “Success” message once the flash firmware is done.

• After completing the process, you must press the Volume Up+ Power button to exit Fastboot mode.

Flash Files using ADB and Fastboot

• Download the ADB drivers. Install it on your PC.

• Switch off your device. Then, enter Fastboot mode. To do this, press and hold down the Volume Down + Power buttons simultaneously for some time.

• Press the Volume Up button to continue when you see the warning message.

• Connect the Xiaomi Redmi 10A mobile to the computer via a USB cable.

• Launch the fastboot on your computer. Open a Command prompt on your PC and type the below command.

• fastboot devices

• It should display the connected devices. If you didn’t get the device, restart the command prompt and Disconnect and Connect your Xiaomi Redmi 10A. If you are detected, type the below commands and hit Enter.

• You should execute the commands after every successful response. Here we take recovery files as an example.

• fastboot flash recovery recovery.img

• After completing the process, Press the Volume Down+ Power button to exit Fastboot mode.

Enter into Recovery Mode

Recovery mode is used to deal with current OS actions. You can wipe user data or fix fundamental issues with the recovery. Most of the time, you have Stock recovery on your mobile. You may have a custom recovery with root access, like TWRP. This method will not affect your User data unless you wipe it. You must press Volume Up+ Power Button on your mobile for 7-10 Seconds to boot into recovery mode. After that, it will kick you into recovery mode or directly boot into System OS. The response may vary depending on the mobile manufacturers. If you received a Recovery mode menu, use the Volume keys to navigate and the Power button to confirm the selection.

Stock Recovery                                                                                               

• Switch off your device. Then, enter into Recovery mode. To do this, press and hold down the Volume Up+ Power buttons simultaneously for some time.

• Press the Volume Down button to continue when you see the warning message.

• Select “Install update.zip to the system.” select the storage where you downloaded your firmware file if you want to install any file.

• Wait for the process to complete. Don’t interrupt your mobile during the process.

TWRP Recovery

When using Rooted mobiles, you use Stock Recovery or TWRP custom recovery. If you have Stock Recovery, you can use the above process. When you install TWRP on your mobile, follow the steps below.

• The Volume Up+ Volume Down+ Power Button Keycombinations will boot your mobile into TWRP Recovery mode.

• On the Home screen, you can find the option “Boot.” Select the item; you will receive further options such as System, Power Off, Recovery, and Bootloader. Select “System.” Your mobile will boot into a Normal OS.

Boot Xiaomi Redmi 10A into Safe Mode.

Try to boot into Safe Mode by pressing Volume Down for 10-15 seconds. Your mobile will boot into Safe mode. Try to Un-Install the recently installed app before the OTA process. Also, check the compatibility in Play Store. When installing apps other than Play Store, Uninstall them and try to boot again. Sometimes third-party apps may trigger the new version, and it may cause the stuck-in boot logo. In Safe Mode, most third-party apps will be disabled by default.

Wipe Cache Data Partition

When you perform, restart using recovery, and you can’t boot into OS again. In this situation, we have another fix by Wiping the cache partition. It also will not affect user data. It will wipe only cache data. You must press Volume Up+ Power Button on your mobile for 7-10 Seconds. After that, it will boot you into the recovery mode or directly boot into System OS. The response may vary depending on the mobile manufacturers. If you received a Recovery mode menu, use the Volume keys to navigate and the Power button to confirm the selection. Remember to wipe only the cache partition, Not the Wipe Data/Factory Reset.

Stock Recovery Method

• Switch off your device. Then, enter into Recovery mode. To do this, press and hold down the Volume Up+ Power buttons simultaneously for some time.

• Press the Volume Down button to continue when you see the warning message.

• Select “Install update.zip to the system.” select the storage where you downloaded your firmware file if you want to install any file.

• Wait for the process to complete. Don’t interrupt your mobile during the process.

TWRP Recovery method

When using Rooted mobiles, you use Stock Recovery or TWRP custom recovery. If you have Stock Recovery, you can use the above process. When you install TWRP on your mobile, follow the steps below.

• The Keycombinations will boot your mobile into TWRP Recovery mode.

• On the Home screen, you can find the option “Wipe.” Select the wipe option; you will receive further details. Select “Cache.” Don’t select the System. It will wipe your OS. After selecting other choices, swipe to erase the data. When the process completes, return to home and boot into OS.

Reset Your Xiaomi Redmi 10A Mobile

Take complete Backup on your mobile. You can do a soft reset or hard reset. If you follow all the methods and still face issues, you can Rest your mobile. To Rest your mobile, Go to settings> System>Reset Options> Reset app preferences/ Factory Reset.

• Soft Reset/App Preference Reset– This option will remove all our custom settings and return to the default settings. It will not delete user data.

• Hard Reset/Factory Reset– It will remove all user data. Your mobile OS will become new, like when you purchased it. You have to set up everything from the beginning.

You can also use your mobile recovery to reset when you can’t boot into your Mobile OS.

Stock Recovery method

• Switch off your device. To do this- Press and hold down the Volume Up + Power buttons simultaneously for some time. Then, enter into the Stock Recovery mode. It will boot your mobile into Recovery mode.
• If you don’t use Rooted mobiles, you have Stock Recovery, which your official mobile manufacturer provides most of the time. If you have stock recovery, you have the direct option of “Wipe Data/Factory Reset.” Navigate to this option and confirm it using the power key button. Remember, It will delete your entire mobile data. So, Backup first before the process.

TWRP Recovery method

When using Rooted mobiles, you use Stock Recovery or TWRP custom recovery. If you have Stock Recovery, you can use the above process. When you install TWRP on your mobile, follow the steps below.

• The Keycombinations will boot your mobile into TWRP Recovery mode.

• On the Home screen, you can find the option “Wipe.” Select the wipe option; you will receive further details. Select “Dalvik, Data, and Internal Storage.” Don’t select the System. It will wipe your OS. After selecting other choices, swipe to erase the data. When the process completes, return to home and boot into OS.

Xiaomi Redmi 10A SAR Value

SAR Value measures a cell phone’s radiation broadcasting capabilities in mobile. Thus, one can ensure that their mobile device does not exceed the maximum limits set for the mobile user’s safety, making SAR important. For example, Xiaomi Redmi 10A SAR Value is Head: 0.398 W/kg, Body: 0.987 W/kg.

Wrap Up

The boot mode key combinations may look simple Because it varies depending on the mobile models. Therefore, knowing your key combinations is necessary. Even if you are a regular user, you must go through some fundamental troubleshooting issues on your mobile, like being stuck on the boot logo or freezing subjects. Learning about your Xiaomi Redmi 10A modes and boot key combinations is necessary to deal with that troubleshooting. We hope the different boot modes will help you deal with your needs when facing any issues during the process; comment below.

Source, (2)